Installing a Hills Hoist is simple, but there are a few things you need to know before getting started. The installation guide below will give you all the information you need to get your new Hills Hoist up and running in no time. You can also avail the benefits of installing a hills hoist in Sydney online via https://www.doctorclothesline.com.au/.
Image Source: Google
First, make sure that your home has the necessary clearance. Your hoist will require at least 3 feet of clearance above and below the device. You'll also need enough room on each side of the hoist to fit the wiring and mounting brackets.
Next, measure your inside and outside staircases. The hoist must be able to travel up and down both types of stairs without having to stop. The maximum weight capacity of a Hills Hoist is 600 pounds.
Install the mounting brackets by drilling two holes into the wall adjacent to each staircase, then screwing in the brackets. Note: If your staircase has risers, be sure to install the brackets high enough so that they don't hit the risers.
Attach the wires to each bracket with wire connectors. Make sure that each wire is connected to a corresponding connector on the hoist.
If you’re like most homeowners, your Hills Hoist is a valuable tool in your arsenal. But like any piece of machinery, it can get old and need replacement parts or an installation guide. In this post, we’ll show you how to install a Hills Hoist clothesline replacement.